Finally got down to IKEA last weekend to buy some bookshelves for the new apartment. Picked up two of the tall units and two of the shorter ones. The plan was to put all four along one wall, but I measured wall to wall, not between the mouldings at the bottom of the walls, so I was just a bit short. I think it worked out pretty well anyway, and the other short case is in the dining area.
Now that I have a place for my books, I’ve unpacked the last of the boxes, and it finally feels like I’m settled in to the new place. Still a bit of clean up to do in the office, but that shouldn’t take long. And once it is done I’ll have space to start working on some of my other projects.
The only thing left on my list of things I want to get is some bedroom furniture. There’s a set at Bob’s Furniture that I like the look of, though none of their sets match what I want. I think I’ll end up getting the bed set, two night stands and a chest of drawers. Other than that, I’m pretty much set.
Now that I’m moved in to the new place, I’ve been giving some more thought to my temp and power monitoring projects. In the old place, my server was located in the same closet as the punch-block for the phone wiring. In the new place, they’re not even close. In order to have more than 2 thermal sensors, I’ll need to put the Basic Stamp II in with the punch block, so I’ll need a way of getting it’s reading back to my server for monitoring.
I was considering serial, using the phone line to the office as RS-485, but I remember all the headaches I had with 485 when working at SimPro, so I’m kindof leaning away from that. For the price of one 232/485 converter, I can get two XBee modules and carrier boards at Adafruit.
I’m also considering hacking apart my Kill-A-Watt to make a Wattcher, basically an XBee crammed into the Kill-A-Watt housing to allow for remote monitoring. I could then use that to track the usage of individual or small groups of devices, which would be nice even if I do decide to install T.E.D. in my breaker panel.
